One-stop service system from process design to equipment manufacturing, installation and commissioning

Time of release：

2022-05-09

When the extruder reaches the discharge pressure, the extrusion barrel is retracted and exhausted, and then the extrusion barrel moves forward to effectively engage with the cavity of the die, and when the discharge pressure is reached, the extrusion rod moves forward simultaneously Move, the aluminum in the extrusion barrel is fed into the diversion hole of the mold, the aluminum alloy slowly flows out and is formed through the mold, the extruder must keep up with daily care, its machine needs to be kept clean, and to a certain extent, the oil pump filter Regular cleaning is required to protect the oil pump blades and pump body, and use a thermometer to check the temperature difference between the oil pump and the new oil pump. Since the maintenance of the extruder requires accumulation of experience, usually, more machines are used to deal with the temperature of the body, and more communication is made with the monitor that starts the machine, because more professional personnel are operating the machine every day, and have a good understanding of the machine. The speed of the machine has a certain understanding to avoid the possibility of overhaul and to understand the relative leakage of the oil pump. No matter how well the oil suction pipe is sealed, the oil pump has a certain degree of suction, so pay special attention to the oil in the oil tank.